Skip Navigation Links | English (United States) | Pumping | Syringe Pumps | Syringe Pump Accessories

​This k​​it consists of most common replacement parts and the tools required to install them.

Package c​ontents

  • Cylinder cap seal
  • Shear key
  • Shear key installation tool
  • Replacement motor brush spring
  • Fuses
  • Label
  • Piston seals
  • Male tube connector
  • Pipe plug​
  • Wrench Package:
    • Cylinder clamp
    • Socket screw key, (1/4 hex)
    • Open-end wrench, (3 1/4)
    • Open-end wrench, (3 3/4)
    • Piston wrench​​​

​These kits consist of the drivers necessary to operate Teledyne ISCO Syringe Pumps​ with LabVIEW™ software for Windows. The LabVIEW program is not included, and must be purchased separately from National Instruments.

Cannot retrieve the URL specified in the Content Link property. For more assistance, contact your site administrator.

​Teledyne ISCO carries a wide variety of seals to fit almost any application; virgin Teflon for corrosive fluids, heavy-duty reinforced for slurries and viscous fluids, high temperature, and UHMW polyethylene. Your choice of seals can be ordered factory-installed in your pump system.

Standard Features

  • General use / CO2 - Black, Graphite filled PTFE

  • High temperature - Black, Graphite fiber PTFE

  • Low pressure - Black, Graphite filled PTFE, single point contact

  • Aqueous solutions - White, UHMW Polyethylene

  • Ammonia (NH3) / Nitric Acid - White, Virgin teflon​​