Syrixus 260x Syringe Pump

260x pump has 1/8" Valco fittings for easy connection in process and pilot-plant plumbing.
Integral button-style pressure transducer in cylinder cap assures excellent stability and repeatability.
Rugged single-ratio drive train has auto-lubricating gears to assure long life and low maintenance.
Each ISCO SyriXus syringe pump is bench tested at the factory.
Cylinder wash system protects the seals from deposits.
Exclusive "Smart Key" controller. All ISCO SyriXus pumps use the same controller that can operate any four pump modules, either independently or together. Operating modes include:

RS-232/485 serial interface for computer control or monitoring of operating parameters.
Redundant safety is designed in. All SyriXus pumps have mechanical and electrical fail-safes, in addition to the factory default or user-set limits.
Corrosion resistance. Nitronic 50 - the standard material for cylinders, pistons, and caps - is an austenitic stainless steel with outstanding strength and corrosion resistance.
Standard seals are heavy-duty, graphite-impregnated Teflon, providing very long life under harsh operating conditions.

Hastelloy 276 cylinder for added corrosion resistance
Temperature control jacket (i.e. cylinder cooling for filling with liquefied gas)
High-temperature and High accuracy pressure transducers and seals up to 200 °C compatible (0.1% linear accuracy)
Drivers for LabVIEW™—National Instruments
4-20 mA inputs and outputs for flow rate and pressure control

For a full list of product specifications, see the datasheet.

	Capacity	Flow Range (mL/min)	Flow Accuracy	Pressure Range (psi, bar)	Standard Pressure Range	Standard Plumbing Ports	Dimensions	Continuous Flow Range (mL/min)	Wetted Materials
1000x	1015 mL	0.001–408	0.5% of Setpoint	10–2,000 0.7–137.9	0.5% FS	1/4” NPT	40.3x10.7x18.4 in 102x27x47 cm	0.01–265	N, H, PTFE
500x	507 mL	0.001–204	0.5% of Setpoint	10–5000 0.7–345	0.5% FS	1/8” NPT	40.3x10.7x18.4 in 102x27x47 cm	0.001–132	N, H, PTFE
500xv High Viscosity	507 mL	0.001–204	0.5% of Setpoint	10–5000 0.7–345	0.5% FS	3/8” NPT	40.3x10.7x18.4 in 102x27x47 cm	0.001–132	N, H, PTFE
260x	266 mL	0.001–107	0.5% of Setpoint	10–9,500 0.7–655	0.5% FS	1/8” Valco	39.8x10.7x18.4 in 101x27x47 cm	0.001–70	N, H, PTFE, G, T
65x	68 mL	0.00001–25	0.3% of Setpoint	10–20,000 0.7–1,390	0.1% FS	1/8” Valco	39.8x10.7x18.4 in 101x27x47 cm	0.00001–16	N, H, PTFE
Wetted Materials: N=Nitronic 50, H=Hastelloy C-276, PTFE= Polytetrafluoroethylene, G=Gold, T=Titanium
* Maximum and minimum flows are dependent on optimizing your pump system. Consult a Teledyne ISCO Product Specialist to determine the best method for your application. For additional information, please consult the factory. Teledyne ISCO is continuously improving its products and reserves the right to change specifications without notice. All brand or product names mentioned herein are trademarks or registered trademarks of their respective holders. ** Flow rate accuracy are based on select conditions of fluid type, pressure and leakage rate.