100HLf Hazardous Location Syringe Pump

Hastelloy 276 cylinder for added corrosion resistance
Temperature control jacket (i.e. cylinder cooling for filling with liquefied gas)
High-temperature pressure transducers (200 °C maximum)
High-precision pressure transducers (0.1% linear accuracy)
Drivers for LabVIEW - National Instruments
4-20 mA input/output for flow rate and pressure control
Dual Pump Continuous Flow System - Air Valves

Content Query ‭[2]‬

Capacity	102 mL
Flow Range	0.01µL – 60 mL/min*
Flow Accuracy	± 0.3% of setpoint (Maximum 0.25 µL/min seal leakage)
Displacement Resolution	3.86 nl/stop
Pressure Range	10 to 10,000 psi (0.7 to 689.5 bar)
Standard Pressure Accuracy	0.5% FS, typical at constant temperature
Optional Pressure Accuracy	0.1% FS, typical at constant temperature
Wetted Materials (Standard)	Nitronic 50, Graphite filled PTFE, TFE, Hastelloy C-276, Inert Polymers, Gold, Titanium
Plumbing Ports	1/8" Valco
Operating Temperature	5–40 °C Ambient
Power Required	100 Vac, 117 Vac, 234 Vac, 50/60 Hz (specify)
Dimensions (H x W x D)	39.8 x 10.7 x 18.4 in (101 x 27 x 47 cm)
Weight	Pump unit—72.3 lb (32.8 kg) Controller— 6.5 lb (3.0 kg)
Standards Conformity	UL 61010-1, ANSI/ISA 12.12.01-2012, CSA C22.2 No. 1010 and No. 213-M1987
*Maximum flow rate is dependent upon operating pressure. (See manual for additional information.)

Chemical Compatibility
Wetted materials have been tested for compatibility with the following fluids.
ethane	ethylene	propane	gasoline
butane	butadiene	hexane	methanol
diesel fuel	jet fuel	ammonia	heptane
isopropanol	acetone	acetonitrile	isobutylene
benzene	ethylbenzene	propylene	methane

Options & Accessories
Temperature control jacket (i.e. cylinder cooling for filling with liquefied gas) Drivers for LabVIEW—National Instruments 4-20 mA inputs and outputs for flow rate and pressure control

	Capacity	Flow Range* (mL/min)	Flow Accuracy**	Pressure Range (psi, bar)	Standard Pressure Range	Standard Plumbing Ports	Dimensions	Continuous Flow Range (mL/min)
1000HLf	1015 mL	0.001–408	0.5% of Setpoint	10–2,000 0.7–137.9	0.5% FS	1/4” NPT	40.3x10.7x18.4 in 102x27x47 cm	0.01–265
500HLf	507 mL	0.001–204	0.5% of Setpoint	10–3750 0.7–258.6	0.5% FS	1/8” NPT	40.3x10.7x18.4 in 102x27x47 cm	0.001–132
260HLf	266 mL	0.001–107	0.5% of Setpoint	10–7,500 0.7–517	0.5% FS	1/8” Valco	39.8x10.7x18.4 in 101x27x47 cm	0.001–70
100HLf	102 mL	0.01 μL–60	0.3% of Setpoint	10–10,000 0.7–689.5	0.5% FS	1/8” Valco	39.8x10.7x18.4 in 101x27x47 cm	0.00001–16
* Maximum and minimum flows are dependent on optimizing your pump system. Consult a Teledyne ISCO Product Specialist to determine the best method for your application. For additional information, please consult the factory. Teledyne ISCO is continuously improving its products and reserves the right to change specifications without notice. All brand or product names mentioned herein are trademarks or registered trademarks of their respective holders. ** Flow rate accuracy are based on select conditions of fluid type, pressure and leakage rate.