Powerful, Easy-to-Use PeakTrak Software

Our intuitive PeakTrak software minimizes the learning curve, enabling you to efficiently complete your purification, saving time and solvent consumption. Log in through a network connection and control the separation from your desktop.

One Screen Operation

Start a separation in seconds. Select a column based on the amount of sample to purify, allow the RFID tag to load the run parameters, press play, load your sample, and walk away. On-the-fly chromatographic changes are easy to make on the touchscreen, even during the run.

Purify more! Up to 75 g with Higher Flow Rates and Pressure
  • Run 750 g columns (with optional column stand)
  • Purify lower solubility samples with higher, 300 psi (20 bar) pressure limit
  • Extended dynamic range UV detection and dual sensitivity ELSD detects high sample loads while maintaining sensitivity for smaller samples
Rack Sensing
  • System senses what size tubes are being used, eliminating potential missed tubes or overfills
  • Supports a variety of collection rack sizes so that purified compounds can be collected in volumes appropriate for the column size being used.
Space Saving Design
  • Place all four 4L solvent bottles on top of the units, saving hood space
  • Uses minimal hood space, only 14.1inches wide and 17 inches deep, including the columns
  • Optional vapor enclosure allows for bench top operation
12- or 15-inch Touch Screen

Standard on all systems is a 12-inch display screen. A 15-inch screen is optional on the 300+.

touch screen
Active Solvent Level Sensing

Never run a column dry or overfill a waste container.