500HLf Hazardous Location Syringe Pump

Hastelloy 276 cylinder for added corrosion resistance
Temperature control jacket (i.e. cylinder cooling for filling with liquefied gas)
High-temperature pressure transducers (200 °C maximum)
High-precision pressure transducers (0.1% linear accuracy)
Drivers for LabVIEW - National Instruments
4-20 mA input/output for flow rate and pressure control
Dual Pump Continuous Flow System - Air Valves

For a full list of product specifications, see the datasheet.

	Capacity	Flow Range* (mL/min)	Flow Accuracy**	Pressure Range (psi, bar)	Standard Pressure Range	Standard Plumbing Ports	Dimensions	Continuous Flow Range (mL/min)
1000HLf	1015 mL	0.001–408	0.5% of Setpoint	10–2,000 0.7–137.9	0.5% FS	1/4” NPT	40.3x10.7x18.4 in 102x27x47 cm	0.01–265
500HLf	507 mL	0.001–204	0.5% of Setpoint	10–3750 0.7–258.6	0.5% FS	1/8” NPT	40.3x10.7x18.4 in 102x27x47 cm	0.001–132
260HLf	266 mL	0.001–107	0.5% of Setpoint	10–7,500 0.7–517	0.5% FS	1/8” Valco	39.8x10.7x18.4 in 101x27x47 cm	0.001–70
100HLf	102 mL	0.01 μL–60	0.3% of Setpoint	10–10,000 0.7–689.5	0.5% FS	1/8” Valco	39.8x10.7x18.4 in 101x27x47 cm	0.00001–16
* Maximum and minimum flows are dependent on optimizing your pump system. Consult a Teledyne ISCO Product Specialist to determine the best method for your application. For additional information, please consult the factory. Teledyne ISCO is continuously improving its products and reserves the right to change specifications without notice. All brand or product names mentioned herein are trademarks or registered trademarks of their respective holders. ** Flow rate accuracy are based on select conditions of fluid type, pressure and leakage rate.